CombiLoader programatorius leidžia skaityti ir įrašyti programinę įrangą į valdiklius su flash atmintimi. Patogus naudojimas, patikimumas, didelis papildomų funkcijų skaičius, nuolatiniai atnaujinimai ir techninė pagalba. Combi Loader taip pat leidžia įrašyti kalibravimus nenuimant ECU nuo automobilio, naudojant diagnostinį įrašymo metodą (įrašymas per diagnostinę K-Line liniją), visiems ECU tipams, kur tai įmanoma.

Į bazinę komplektaciją įeina: standartinis USB Host, specializuotas adapteris, USB apsaugos raktas ir programinė įranga.

Visi nauji programos moduliai naudoja bendrą papildomą elektroninį raktą (įskaičiuotas į komplekto kainą).
Moduliams, dirbantiems su ECU per CAN, reikalingas J2534 adapteris, įsigyjamas atskirai. Rekomenduojame Scanmatik adapterius.
USB Host adapteris naudojamas duomenų mainams, taip pat naudojamas kaip universalus elektroninis raktas ir konverteris, užtikrinantis darbą su K-L-line nenaudojant COM prievado. USB Host adapterio konstrukcija leidžia jį naudoti vidinio procesoriaus mikroprogramos (firmware) atnaujinimui.

Specializuotas adapteris kartu su USB Host naudojamas valdymo signalų formavimui ECU programinės įrangos nuskaitymui ir įrašymui per K-Line sąsają.

Programinėje įrangoje CombiLoader nėra numatyta apsaugos nuo kopijavimo, tačiau programos veikimas galimas tik naudojant specializuotą adapterį. Adapteris, įtrauktas į programos komplektą, automatiškai užtikrina duomenų mainus, perjungimą į programavimo režimą ir maitinimo tiekimą. Papildomi moduliai ir įskiepiai platinami už atskirą mokestį, įsigytų įskiepių palaikymas ir atnaujinimai yra nemokami. 

Funkcionalumas programinės įrangos paketo CombiLoader

• Valdiklio duomenų nuskaitymas ir išvedimas.
• Valdiklio komplektacijos žymų nuskaitymas ir išvedimas.
• Programinės aparatinės įrangos nuskaitymas iš failo.
• Įkeltos programinės aparatinės įrangos tipo identifikavimas (vieno arba dviejų režimų).
• Programinės aparatinės įrangos įrašymas į valdymo bloką.
• FLASH atminties atlaisvinimas valdiklyje ir vidinio programos buferio atlaisvinimas.
• Programinės aparatinės įrangos nuskaitymas iš valdymo bloko į vidinį programos buferį.
• Dviejų režimų programinės aparatinės įrangos sukūrimas Janvar-5 ir Mikas-7 šeimos valdikliams, apimančių dvi kalibravimo lenteles ir leidžiančių jas perjungti darbo metu.
• Maršrutinio kompiuterio funkcijų pridėjimas į programinę aparatinę įrangą su parametrų (iki 20 – laisvai pasirenkami) išvedimu į VDO prietaisų skydelį, klaidų peržiūra ir pašalinimu.
• Klaidų (gedimų kodų) nuskaitymas ir atstatymas.

Programinės įrangos reikalavimai:

• Programinės įrangos paketas CombiLoader, valdomas operacinės sistemos Windows 95/98/2000/XP/7/8/10/11, ir sąveikauja su adapteriu duomenų mainams tarp elektroninio valdymo bloko ir kompiuterio USB prievado.
• Programinės įrangos paketo valdymo programa veikia tik prijungus specializuotą adapterį. Adapteris, tiekiamas su programa, automatiškai atlieka duomenų mainus, perjungimą į programavimo režimą ir maitinimo tiekimą.

Programa nuolat modernizuojama. Registruotiems vartotojams atnaujinimai įsigytos konfigūracijos ribose yra nemokami. Papildomi moduliai ir įskiepiai tiekiami už atskirą mokestį, įsigytų įskiepių palaikymas ir atnaujinimai yra nemokami. 

Moduliai, įtraukti į bazinį komplektą:

• BSL mode for ST10F27x and C16x
  • Bosch M7.9.8 (Hyundai, KIA Ceed, ProCeed, Cerato, Rio, etc.)
  • Bosch ME7.9.7 (Chery Fora, etc.)
  • Bosch ME7.9.9 (Chevrolet Captiva)
  • Bosch ME7.1 (Volkswagen, Audi, Skoda, Porsche)
  • Bosch ME7.5 (Volkswagen, Audi, Skoda)
  • Siemens SIMK41 (Chery QQ, etc.)
  • Siemens SIMK43 (Hyundai, KIA)
  • Siemens 5WK
  • Siemens SIMOS 2.x
  • Siemens MS41, MS42, MS43 (BMW)
• BSL mode for ST10F168: FLASH/EEPROM reading and writing of ECUs based on ST processors of the ST10F168 family via the built-in BootStrapLoader. Such ECUs include, in particular, MagnetiMarelli IAW 59F, installed in Fiat cars.
• BSL mode for ST10F27x
  • Bosch M7.9.8 (Hyundai, KIA Ceed, ProCeed, Cerato, Rio, etc.)
  • Bosch ME7.9.7 (Chery Fora, etc.)
  • Bosch ME7.9.9 (Chevrolet Captiva)
  • Bosch ME7.1 (Volkswagen, Audi, Skoda, Porsche)
  • Bosch ME7.5 (Volkswagen, Audi, Skoda)
  • Siemens SIMK41 (Chery QQ, etc.)
  • Siemens SIMK43 (Hyundai, KIA)
  • Siemens 5WK
  • Siemens SIMOS 2.x
  • Siemens MS41, MS42, MS43 (BMW)
• BSL mode for ST10F280: Any types of ECUs on ST10F280 family processors, for example, MagnetiMarelli 6LPB, installed on Peugeot cars.
• BSL module for ST10F296: Any types of ECUs on ST10F296 family processors, for example, MagnetiMarelli 4HV, installed on Skoda Octavia/Fabia cars with 1.4L engine (BUD).
• Janvar-5.1
• Janvar-7.2
• VS-5.1
• Bosch C509 Hyundai/Kia: Hyundai/Kia cars with ECU on C509 processor with external FLASH Am29F010.
• Bosch MP7.0: VAZ vehicles.
• Bosch M7.9.7(+): VAZ vehicles.
• Mikas-7.1: GAZ and UAZ vehicles.
• Mikas-7.6: ZAZ and Daewoo vehicles. 

CombiLoader papildomi mokami moduliai (teiraukitės kainos) +37062890000

1. Modulis BSL XC27x5
FLASH and EEPROM reading/writing of M74, etc ECUs (e.g. Magneti Marelli), based on Infineon XC27x5 via BootStrapLoader. 

2. Modulis M86
FLASH/EEPROM reading/writing of М86 ECUs with VAZ software based on Infineon XC27x5 via built-in BootStrapLoader. Writing via OBD.
Lada Vesta/XRay/Largus. 

3. Modulis Mikas-12/M75/M74.5/M86I
FLASH/EEPROM reading/writing of MIKAS-12, M74.5, M75 and M86 made by ELKAR/ITELMA used in new VAZ and GAZ vehicles. 

4. Modulis M74 (K-Line + CAN)
FLASH/EEPROM reading/writing of M74 ECUs based on Infineon XC27x5 via BootStrapLoader;
Lada Granta. 

5. Modulis M11/M73A
Reading for backup creation and recovery from the backup or recovery (outdated version update) of ECU original software in case there is a suspicion that ther is a modified file written in the ECU whose use is not authorized by the ECU manufacturer.
Mikas-11 (ET, CR) and M73 ECUs with the latest software versions. The module provides working with the so-called “locked ECUs” which are not supported in the standard Mikas-11/ Mikas-11ET / Mikas -11CR / VS-8, Yanvar-7.2+ / М73 or BSL modules. 

6. Modulis Mikas-10.3 (M114)
Map area reading/writing, EEPROM reading/writing.
М114 ECUs (the new M10.3 ECU version is installed in Daewoo Sens, GAZel etc vehicles). 

7. Modulis Mikas-12.3 (M124)
Map area reading/writing, checksum recalculation.
М124 ECUs (the new Mikas ECU version is installed in GAZ vehicles). 

8. Modulis Mikas-10.3 (M103, M113)
FLASH and EEPROM reading/writing of Mikas-10.3/11 (M103 and M113).
Daewoo, Ukrainian ZAZ, GAZ. 

9. Modulis Mikas-11/VS-8
FLASH and EEPROM reading/writing of Mikas-11(ET, CR) in GAZ vehicles.
Volga, Gazel, UAZ with Mikas-11b, Mkas-11ET, Mikas-11CR or VS-8.
Locked ECUs are not supported! 

10. Modulis Yanvar-7.2+/M73
Yanvar-7.2+ or M73 in VAZ vehicles.
Locked M73 are not supported! 

11. Modulis AMT VAZ
FLASH memory reading/writing of AMT VAZ ECUs via OBD; checksum correction. 

12. Modulis Bosch ME17.9.7 VAZ / UAZ
Full FLASH or map area reading/writing of Bosch ME17.9.7 ECUs in VAZ and UAZ via OBD without opening the ECU. 

13. Modulis Bosch ME17.9.7 VAZ / UAZ (discount for BSL TC176x J2534 users)
Discount for BSL TC176x J2534 users. 

14. Modulis BSL TC17xx J2534 (Variant 1)
Variant 1. This variant is limited to writing only Bosch M(E)17.9.7 ECUs of VAZ and UAZ vehicles without dump checksum recalculation. 

15. Modulis BSL TC17xx J2534 (Variant 2)
Variant 2. This variant has no limitations on writing, no dump checksum recalculation. It saves dumps in SMS-BIN proprietary format. 

16. Modulis BSL TC17xx J2534 (Variant 3)
FLASH and EEPROM reading/writing of Infineon TriCore ECUs in BSL: ME17.9.7, VAZ, UAZ M(E)17.9.71, TPROT 12, UAZ ME17.9.11/12, Hyundai, Kia Siemens SIM2K-2xx Continental EMS2204 Delphi MT80 Delphi SID-208 Various MED17 Various EDC17 Other Bosch TPROT, Siemens ECUs with TriCore CPUs. No limitations on writing, checksum correction, saving files in the open format. 

17. Modulis Set of modules: Bosch MEDC17 Hyundai/Kia, Bosch ME17 China
FLASH-memory reading/writing of Bosch MEDC17 ECUs in Hyundai/Kia vehicles via OBD.
Activated to free for users of BSL TC17xx J2534 Variant 2 and 3.

Bosch MEDC17 Hyundai/Kia supports:
Bosch EDC17C08 reading/writing;
Bosch EDC17CP14 (TPROT3) reading/writing;
Bosch EDC17CP14 (TPROT11) reading/writing;
Bosch EDC17C53 reading/writing;
Bosch MEx17.9.11/12/13 reading/writing;
Bosch MEx17.9.2 reading/writing;
Bosch MEx17.9.8 reading/writing;
Bosch MEx17.9.21 reading/writing;

Bosch MEDC17 Hyundai/Kia UDS supports:
Bosch EDC17C57 reading/writing (modified files into unlocked ECUs);

Bosch ME17 GreatWall/Chery
Map area reading/writing of Bosch ME17 ECUs in GreatWall, Chery via OBD.  

18. Modulis Bosch MEDC17 PSA and SID807 PSA
FLASH-memory reading/writing of Bosch MEDC17 ECUs and FLASH-memory writing of SID807 ECUs in Peugeot/Citroen vehicles via OBD.

Supported ECUs:
Bosch EDC17C10 (TC1797)
Bosch MED17.4 (TC1766)
Bosch MEV17.4 (TC1796 with external memory)
Bosch MEV17.4 (TC1766)
Bosch MEV17.4.2 (TC1767)
SID807 (TC1796 with external memory)
SID807EVO (TC1797)
Checksum correction. 

19. Modulis Bosch MEDC17 PSA and SID807 PSA.
Discount for users of BSL TC17xx J2534 variants 2 or 3. 

20. Modulis Bosch MEDC17 VAG UDS
Writing of Bosch MEDC17 ECUs in VAG vehicles over UDS protocol via OBD.

Supported ECUs:
Bosch EDC17CP04, EDC17CP14, EDC17CP20, EDC17CP24, EDC17CP44, EDC17C46, EDC17C54, EDC17C64;
Bosch MED17.1, MED17.1.1, MED17.1.6, MED17.5, MED17.5.5, MED 17.5.20, MED17.5.21, MED17.5.22, MED17.5.24, MED17.5.25, MED17.5.26.
Checksum correction.
Reading is possible with BSL TC17xx J2534 Variants 2 and 3.  

21. Modulis Bosch MEDC17 VAG UDS.
Discount for users of BSL TC17xx J2534 Variants 2 or 3. 

22. Modulis Bosch ME9.x GM J2534 + Bosch ME7.9.9 J2534
FLASH reading/writing of Bosch ME9.x and Bosch ME7.9.9 ECUs in Chevrolet/Opel/Caddilac/SAAB vehicles.
Bosch ME9.x GM supports checksum correction. 

23. Modulis Bosch M(E)7.x (OBDII)
The module allows firmware writing using the diagnostic method, without removing the ECU from the car, via the diagnostic connector (to work with the ECU on VAZ cars, it is necessary to connect directly to the ECU connector, there is no need to disassemble the unit).

The module is available in two versions: working via the Bootloader adapter and via the J2534 adapter.
Supports work with Bosch MSE3.0, M7.9.7, ME7.9.7, M7.9.71 (M7.9.7+), M7.8, ME7.8.8 ECUs. 

24. Modulis Bosch M(G)7.9.8 J2534
Writing of Bosch M(G)7.9.8 ECUs installed in Hyundai and Kia vehicles via the diagnostic connector without removing the ECU from the vehicle. 

25. Modulis Bosch EDC17CV44/54 (J2534)
FLASH reading/writing of Bosch EDC17CV44/54 ECUs of MMZ/MTZ/YMZ/FAW/SHAANXI/BAW/KINGKAN engines in trucks via OBD. Checksum correction. 

26. Modulis Bosch EDC7UC31 (J2534)
FLASH memory reading/flashing of Bosch EDC7UC31 ECUs installed in KAMAZ/MMZ/MTZ/YMZ/BAW/Dayun/DongFeng/FAW/Shaanxi vehicles via OBD. Checksum correction. 

27. Modulis Siemens ACDelco
FLASH-memory reading/writing of 5WY7128 ECUs in Cadillac STS/SRX vehicles via OBD. 

28. Modulis Siemens ACDelco.
Discount for the users of Delphi ACDelco module. 

29. Modulis SID206 Ford J2534 + SID208 Ford J2534 + SID209 Ford J2534 + SID211 Ford J2534
SID206: software and (or) map area writing of SID206 ECUs in Ford Mondeo 4, Galaxy, S-Max, Kuga 1 vehicles with 1.8-2.0L engines.
SID208: software and (or) map area writing of SID208 ECUs in Ford Transit 2.2L Diesel vehicles.
SID209: software and (or) map area writing of SID209 ECUs in Ford Ranger 3.2L Diesel vehicles.
SID211: software and (or) map area writing of SID211 ECUs in Ford Transit 2.2L Diesel vehicles.
Important:
- During the writing process the CPU password is read, it can be used for further work with the BSL TC17xx J2534 module.
- If the ECU verifies the digital signature (RSA enabled), modified files cannot be written. To disable digital signature verification, use the BSL TC17xx J2534 module. 

30. Modulis Ford Extra (SID208/SID209(CK4A))
Extension for SID206/208/209/211 Ford J2534 module. Full access to FLASH/EEPROM of SID208/SID209(CK4A) ECUs. 

31. Modulis SID208 PSA J2534
Map area/software reading/writing of SID208 ECUs in Peugeot Boxer/Citroen Jumper vehicles via OBD.
Map area checksum correction; identification; password reading for further unlocking with the BSL TC17xx J2534 module; error reading/clearing.
Unlocking in BSL mode required for using full functionality of the module (BSL TC17xx J2534 is obligatory for purchase)  

32. Modulis Bosch EDC17C11/EDC17C42 + SID301/305/306/307 + Delphi DCM3.4 Renault J2534
Software/map area reading/writing of ECUs in Renault/Nissan vehicles with Diesel engines. 

33. Modulis EMS3130 J2534
Software/map area reading/writing of of EMS3130 ECUs in Renault Duster 1.6L vehicles via OBD.
Map area checksum correction, VIIN code change, identification. 

34. Modulis EMS3130 J2534.
Discount for the users of the Siemens Sirius 3x module. 

35. Module Continental EMS 3110/3120/3125/3150 Renault
Software/map area reading/writing of EMS3110, EMS3120, EMS3125 and EMS3150 ECUs in Renault vehicles via OBD.
Map area checksum correction, identification. 

36. Modulis Renault UDS (Continental EMS3155 Renault J2534, Continental SID309, Continental SID310 Renault J2534, Bosch EDC17C84 Renault J2534)
Software/map area reading/writing of Renault UDS ECUs in Renault/Nissan vehicles via OBD.

Continental EMS3155 1.2T;
Continental SID309 1.5L;
Continental SID310 1.5L and 2.3L;
Bosch EDC17C84 1.6L.

Map area checksum correction, identification. To get full access to FLASH/EEPROM of EMS3155/SID309/SID310, please use Renault Exta module 

37. Modulis Renault Extra
Extension for Renault modules. Full access to FLASH/EEPROM of EMS3120/EMS3125/EMS3150/EMS3155/SID309/SID310/SID307 ECUs.

In order to buy it you need to have one of these modules: Continental EMS 3110/3120/3125/3150 Renault or Renault UDS (Continental EMS3155 Renault J2534, Continental SID309, Continental SID310 Renault J2534, Bosch EDC17C84 Renault J2534) depending on what ECUs you plan to have extrended access to. 

38. Modulis Continental EMS2204/EMS2211 Ford J2534
The EMS2204 module is designed to read calibrations and write software and/or calibration areas of the EMS2204 ECU, installed, in particular, on Ford Focus 3 vehicles with 1.6L engines.

The EMS2211 module is designed to read/write software and/or calibration areas of the EMS2211 ECU, installed, in particular, on Ford Fiesta vehicles with 1.6L engines. 

39. Modulis Siemens SIM28/29 Ford + Siemens SIM22/210 Ford
FLASH-memory reading/writing of Siemens ECUs in Ford Focus 2, C-Max, Kuga vehicles with 1.4-1.6L engines (2004-2009), Ford Fiesta, Fusion with 1.2-1.6L engines.
It is possible to open and save files in the SMS-Soft Container File format (new format for ChipTuningPRO and CombiLoader) + in BIN format.
VID checksum correction. 

40. Modulis Siemens SIMTEC70, SIMTEC7x, Bosch M7.6.x, Bosch M7.9.7.1, Bosch PSG16 and Delphi MT35E
SIMTEC70: FLASH-memory reading/writing of Siemens SIMTEC70 ECUs in Opel vehicles via OBD:
Opel Astra G (1998-2000) X18XE1/X20XEV;
Opel Vectra B (1998-2001) X18XE1/X20XEV;
Opel Zafira (1999-2000) X18XE1.

SIMTEC7x:FLASH-memory reading/writing of Siemens SIMTEC71.x, SIMTEC75.x and SIMTEC81 ECUs in Opel vehicles via OBD.
The module has two versions:
- via the Combiloader adapter over K-Line;
- via J2534 over K-Line or CAN bus.
SIMTEC 71.0/71.1 (K-Line):
Opel Astra G (2001-2008) Z18XE
Opel Corsa C (2001-2009) Z18XE
Opel Meriva (2003-2009) Z18XE
Opel Tigra B (2005-2009) Z18XE
Opel Vectra B (2001) Z18XE
Opel Zafira (2001-2005) Z18XE
Opel Omega B (2002-2003) Z22XE

SIMTEC 71.5/71.6 (CAN): Opel Astra H (2004-2007) Z18XE
Opel Vectra C (2002-2007) Z18XE
Opel Signum (2002-2007) Z18XE

SIMTEC 75.1/75.5 (CAN): Opel Astra H (2006-2009) Z16XER/Z18XER
Opel Vectra C (2005-2009) Z18XER
Opel Signum (2005-2009) Z18XER
Opel Zafira B (2005-2009) Z16XER/Z18XER
SIMTEC 81 (CAN):
Opel Astra H (2007-2009) Z22YH
Opel Vectra C (2003-2008) Z22YH
Opel Signum (2003-2008) Z22YH
Opel Zafira B (2005-2009) Z22YH

Bosch M7.6.x:FLASH-memory reading/writing of Bosch M7.6.x ECUs in Opel vehicles via OBD.
Bosch M7.6.x:
Opel Agila (2004-2007) Z10XEP
Opel Astra-G (2004-2008) Z14XEP
Opel Astra-H (2004-2009) Z12XEP/Z14XEP/Z14XEL/Z20LER/Z20LEL/Z20LEH/Z16LET
Opel Corsa-C (2005-2009) Z10XEP/Z14XEP
Opel Corsa-D (2007-2009) Z10XEP/Z12XEP/Z14XEP/Z16LER
Opel Meriva (2004-2009) Z14XEP/Z16LET
Opel Tigra-B (2005-2009) Z14XEP Opel Zafira-B (2005-2009) Z20LER/Z20LEH/Z20LEL

Bosch M7.9.7.1: FLASH-memory writing of Bosch M7.9.7.1 in Chevrolet via OBD.
Chevrolet Aveo 1.6L

Bosch PSG16: FLASH-memory writing of Bosch PSG16 in GM vehicles via OBD.

Delphi MT35E: FLASH-memory reading/writing of Delphi MT35E ECUs in Opel vehicles via OBD:
Opel Meriva (2006-2009) Z16XEP (K-Line)
Opel Astra H (2004-2009) Z16XEP (CAN)
Opel Astra H (2007-2009) Z16XE1 (CAN)
Opel Zafira B (2005-2009) Z16XEP (CAN)
Opel Zafira B (2007-2009) Z16XE1 (CAN)
Opel Vectra C (2006-2009) Z16XEP (CAN)
Opel Signum (2006-2009) Z16XEP (CAN) 

41. Modulis Siemens Sirius 3x
Reading/writing of Sirius32/EMS3132/Sirius34/EMS3134 ECUs in Renault Clio/Megane/Scenic/Logan vehicles via OBD. 

42. Modulis Siemens VDO MSE3.5
Software/map area reading/writing of Siemens VDO MSE3.5 ECUs in TagAz RoadPartner/TaGeR/SsangYoung Rexton vehicles with 2.3/2.8/3.2L engines via OBD. 

43. Modulis Delphi MT80 + Delphi MT60 + Siemens SIMTEC76 J2534
FLASH reading/writing of the ECUs via OBD. Delphi MT60: Daewoo Gentra;
Delphi MT80: Chevrolet Aveo, Chevrolet Cruze; Siemens SIMTEC76: Chevrolet Cruze, Chevrolet Orlando, Daewoo Lacetti.
Checksum correction is possible if there full dump.
To get full access to FLASH/EEPROM of MT60/MT80 ECUs, you have to buy the module extension. Standard reading/writing time of MT60/MT80: 21/4 min. With the module extension: 1/1.5 min. 

44. Modulis Delphi MT60 + Delphi MT80 (extension)
Extension for Delphi MT60 + Delphi MT80 + Siemens SIMTEC76 J2534 module. Full access to FLASH/EEPROM of MT60/MT80. Standard reading/writing time of MT60/MT80: 21/4 min. With this extension: 1/1.5 min. 

45. Modulis Siemens SIMK2K-243 GM
Software and map area reading/writing of Siemens SIM2K-243 GM ECUs in Chevrolet Spark M300 vehicles via OBD. 

46. Modulis Set: Siemens SIM2K C201/240/241/242/245 / Siemens SIM2K 140/141/341/D160 / Delphi MT38 / Delphi MT86
Siemens SIM2K C201/240/241/242/245 ECUs used in Hyundai, Kia, SsangYong vehicles.
FLASH-memory reading/writing via OBD.

Siemens SIM2K 140/141/341/D160 ECUs used in Kia (Magentis, Cerato, Carens, Sorento, Sportage), Hyundai (Sonata, IX35) vehicles with 2.0L (and more) engines as well as in Chevrolet Epica.
Software/map area reading/writing via OBD.
The set includes two verions:
- via the Combialoader adapter using K-Line
- via J2534 using K-Line or CAN bus

Delphi MT38 ECUs used in Kia (Carnival, Mohave, Opirus, Magentis, Sorento), Hyundai (Genesis, Grandeur, Santa Fe, Sonata, IX55) vehicles with V6 2.7/3.3/3.8L engines.
FLASH memory reading (only K-Line ECUs) and writing via OBD.
Reading of CAN bus ECUs is done with BSL TC17xx J2534 module.
The set includes two verions:
- via the Combialoader adapter using K-Line
- via J2534 using K-Line or CAN bus

Delphi MT86 ECUs used in Kia (Cadenza, Quoris), Hyundai (Genesis, Equus) vehicles with V6 3.3/3.8/5.0L engines.
Map area reading and software/map area writing via OBD.
Reading of FULL FLASH is done with BSL TC17xx J2534 module. It works via J2534.  

47. Modulis Siemens SIM2K-D52/D51
Software and map area reading/writing of Siemens SIM2K-D52/D51 ECUs in Chevrolet Spark M-300 and TagAz Vega C-100 vehicles via OBD. 

48. Modulis Siemens Vagon VAx
Full FLASH/EEPROM/map area reading/writing of Vagon VAx ECUs in Lifan Breeze, etc vehicles. 

49. Modulis Siemens SIMK3x/4x J2534
Software or map area reading/writing via OBD over CAN bus or K-Line. 

50. Modulis Siemens SIMK43/41/31 J2534.
Discount for the users of Siemens SIMK43/41/31. 

51. Modulis Siemens Sirius D3x/D4x
FLASH reading/writing of Siemens Sirius ECUs in Chevrolet (Lacetti, Aveo, Tacuma, Rezzo), Daewoo (Matiz). Programming is possible in the vehicle via the diagnostic connector. 

52. Modulis Siemens MS41/42/43
Map area reading/writing of Siemens MS41/42/43 ECUs in BMW E36/E38/E39/E46/E53 vehicles with 6-cyl 2.0L-3.0L engines. 

53. Modulis Delphi DCM3.7
FLASH-memory reading/writing of Delphi DCM3.7 ECUs in SsangYong, Opel, Chevrolet, Great Wall, Kia, Hyundai, VAG vehicles via OBD. Checksum correction, identification, DTС codes reading, reset. 

54. Modulis Delphi ACDelco
FLASH-memory reading/writing of Delphi ACDelco E37/E38/E39/E67/E78/E80/E83 ECUs in Chevrolet and Opel via OBD.
ACDelco E37 (2.4L — LE5/LE9):
Chevrolet Captiva (C140) 2011+;
Opel Antara 2011+;
ACDelco E38 (4.8L — LY2; 5.3L — LY5/LC9/L45; 6.0L — LQ4/L92/L76; 6.2L — L92/L94/L9H):
Chevrolet Avalanche;
Chevrolet Suburban;
Chevrolet Tahoe;
Caddilac Escalade;
GMC Yukon;
Hummer H2;
ACDelco E39/E39A:
Cadillac SRX 2010+ 3.0L (LF1);
Opel Insignia 2.0L A20NHT (LHU);
Chevrolet Captiva (C140) 2011+ 3.0L (LF1, LFW);
Chevrolet Malibu 2012+ 3.0L (LFW);
Opel Antara 2011+ 3.0L (LF1);
Opel Antara 2012+ 3.0L (LF1, LFW);
Opel Astra J SIDI 170HP;
Opel Astra J OPC;
ACDelco E67:
Caddilac SRX 4.6L (LH2);
Hummer H3;
ACDelco E78: Opel Astra-J A14NET(LUJ);
Opel Corsa-D 2012;
A12XEL/A12XER/A14XEL/A14XER(LDD);
ACDelco E80:
Chevrolet Colorado Z71;
Chevrolet Malibu LCV;
ACDelco E83:
Chevrolet Aveo 2012 Z16XER(LDE);
Opel Insignia A16XER(LDE)/A18XER(2H0);
Opel Astra-J A14XER(LDD)/A16XER(LDE)/A18XER/A16LET(LLU);
Opel Corsa-D 2010 A10XEP/A12XEL/A12XER/A14XEL/A14XER(LDD);
Opel Meriva-B A14XER(LDD)/A14NET(LUJ). 

55. Modulis Delphi MT34 China (J2534) + Delphi MT80 China (J2534) + Delphi MT92 Great Wall (J2534)
OBD reading/writing of Delphi MT34, Delphi MT80 and Delphi MT92 ECUs in Great Wall/Haval/Geely vehicles. 

56. Modulis Delphi MT05
Full FLASH reading/writing of Delphi MT05 and Delphi MT05.2 in various moto vehicles.
Delphi MT05 files size - 128KB; Delphi MT05.2 file size - 256KB. ECU type is identified automatically. Map area checksum correction, identification.

You can use HUD ECU Hacker for diagnostics and data logging. 

57. Modulis Delphi MT20
Full FLASH/EEPROM/map area reading/writing of Delphi MT-20U ECUs in Chinese vehicles (Great Wall, BYD, etc).
Supported ECUs: MT-20U, MT20U2, MT20UED, MT22U, MT22.1, MT22.1.1, MT22.5.  

58. Modulis Delphi MR140/HV240 Ext
FLASH/EEPROM reading/writing of Delphi MR140 and Delphi HV240 ECUs in Chevrolet and Daewoo vehicles without opening the ECU. ECU recovery after unsuccessful writing attempts. 

59. Modulis MagnetiMarelli MM4HV/MM7GV VAG
FLASH memory reading/writing, checksum correction of MagnetiMarelli ECUs in VAG vehicles;
MagnetiMarelli MM4HV: 1.4L petrol engines BUD, BXW, CGGA, CGGB;
MagnetiMarelli MM7GV: 1.4L/1.6L petrol engines CFNA, CFNB, CLRA, CLPA, CLPB, CLSA, CGGB; 

60. Modulis GM IEFI-6/ITMS-6F
Reading and writing FLASH-memory of GM IEFI-6/ITMS-6F ECUs installed in Daewoo vehicles. 

61. Modulis Visteon ESU-131/312/411/412/415/418
FLASH-memory reading and writing of Visteon ESU-131/312/411/412/415/418 ECUs installed in Ford Focus 2, C-Max, Kuga vehicles (2004—2010) with 1.8—2.0L engines and Ford Mondeo 4, S-Max, Galaxy vehicles (2004—2011) with 2.0—2.3L engines via OBD. Checksum correction. 

62. Modulis Valeo V4X + Sagem S3K
Valeo V4X:FLASH-memory reading/writing of Valeo S3000/V40/V42 ECUs in Renault vehicles via OBD.
Sagem S3K: software and map area reading/writing of Sagem S3000 (512k FLASH) ECUs in Renault via OBD.
Map area checksu correction, identification. 

63. Modulis Bosch ME7.4.4, Bosch ME7.4.5, Valeo V46 and Valeo J34P
FLASH-memory reading/writing of ECUs in Citroen/Peugeot vehicles via OBD.
DTC reading/displaying, identification, initialization, map area checksum correction. 

64. Modulis Cummins CMx J2534
FLASH-memory reading and flashing of Cummins CM876/2150/2220/2880/2350/CM2670E ECUs installed in GAZ, MAZ, KAMAZ vehicles via OBD. 

65. Modulis Transtron Isuzu J2534
FLASH-memory reading/writing of Transtron ECUs installed in Isuzu with 4JJ1, 4JK1, 4HK1, 6HK1 engines via OBD.

Transtron Isuzu 7058 J2534: FLASH memory reading/writing via K-Line, Renesas SH7058, possible only when there is bootloader in the ECU software.

Transtron Isuzu 705x R/O J2534: FLASH memory reading via K-Line, Renesas SH7055. 

66. Modulis Bosch MEDC17 BMW Exx
Software and map area writing of Bosch MEDC17 ECUs in BMW Exx series via OBD.

Supported ECUs:

Bosch EDC17C06, EDC17C50, EDC17CP02, EDC17C41, EDC17CP09, EDC17CP45.
Bosch ME17.2.1/ME17.4.5, MEV17.2.1/MV17.4.6, MEVD17.2, MEVD17.2.2.
Checksum correction.

Reading is possible with BSL TC17xx J2534 Variant 2 and 3.

Supported file formants:

BIN;
compressed BIN (SMS-BIN);
SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). 

67. Modulis Bosch MEDC17 BMW Exx (for owners of BSL TC17xx J2534 Variant 2 and 3)
Discount for owners of BSL TC17xx J2534 Variant 2 and 3 

68. Modulis Bosch MEDC17 Suzuki
Software and map area writing of Bosch MEDC17 ECUs in Suzuki vehicles via OBD.

Supported ECUs;

Bosch ME17.9.51;
Bosch ME17.9.6.
Checksum correction.

Reading is possible with BSL TC17xx J2534 Variant 2 and 3.

Supported file formants:

BIN;
compressed BIN (SMS-BIN);
SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). 

69. Modulis Bosch MEDC17 Suzuki (for owners of BSL TC17xx J2534 Variant 2 and 3)
Discount for owners of BSL TC17xx J2534 Variant 2 and 3 

80. Modulis Bosch MEDC17 VAG K/CANTP2.0
Software and map area writing of Bosch MEDC17 ECUs in VAG vehicles via K-Line or CANTP2.0 via OBD.

Supported ECUs:

Bosch EDC17U01, EDC17U05, EDC17CP04, EDC17CP14, EDC17CP20, EDC17CP24;
Bosch MED17.1, MED17.1.1, MED17.5, MED17.5.1, MED17.5.2, MED17.5.5, MED17.5.6, ME17.5.20.
Checksum correction.

Reading is possible with BSL TC17xx J2534 Variant 2 and 3.

Supported file formants:

BIN;
compressed BIN (SMS-BIN);
SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). 

81. Modulis Bosch MEDC17 VAG K/CANTP2.0 (for owners of BSL TC17xx J2534 Variant 2 and 3)
Discount for owners of BSL TC17xx J2534 Variant 2 and 3 

82. Modulis DSI TCM
FLASH memory reading/writing of DSI TCM ECUs in SsangYong/Geely vehicles via OBD. Checksum correction. 

83. Modulis WestPort WP580 (J2534)
Reading/writing of WestPort WP580 ECUs in GAZ vehicles. 

84. Modulis Bosch MEDC17 BSM
FLASH/EEPROM reading/writing of Bosch MEDC17 without opening. Checksum correction.

ECUs with internal FLASH, TPROT higher than 3 (TC1766/TC1796) and ECUs with Chinese software are not supported. Dialink is required.

Supported file formats:

BIN;
compressed BIN (SMS-BIN);
SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). 

85. Modulis Bosch MEDC17 BSM (for owners of BSL TC17xx J2534 Variant 2)
Discount for owners of BSL TC17xx J2534 Variant 2 

86. Modulis Bosch MEDC17 BSM (for owners of BSL TC17xx J2534 Variant 3)
Discount for owners of BSL TC17xx J2534 Variant 3 

87. Modulis Delphi DCM6.2 PSA
Software and map area reading/writing of Delphi DCM6.2/6.2A/6.2C ECUs in Peugeot/Citroen vehicles via OBD.

Map area checksum correction, identification, error resing and resetting. 

88. Modulis Continental SIM2K-25x (J2534) + Continental SIM2K-26x (J2534)
FULL FLASH and EEPROM reading/writing of Continental SIM2K-250/251/253/260/261 ECUs in Hyundai/Kia vehicles.

Work can be done with opening the ECU, without opening the ECU (after preparation) or via OBD (functions of identification, reading / resetting errors and writing software and / or calibrations are available).

The diagnostic mode supports identification, error reading/reset and software/map area writing. Marp area checksum correction. The module allows to disable the digital signature verification. 

89. Modulis Bosch EDC16 BSM and Bosch ME9 BSM
FLASH/EEPROM reading/writing of EDC7/EDC16/PSG16/ME9 ECUs without opening.

Dialink is required.

The module DOES NOT support ME9 ECUs of the following brand: BMW, MercedesBenz. 

90. Modulis SIM271 2.0 MercedesBenz (J2534)
FLASH/EEPROM reading/writing of SIM271DE 2.0/SIM271KE 2.0 installed in MercedesBenz vehicles.

The module works via OBD and on the bench. ECU opening is not required. Identification, errors reading/reset, map area checksum correction. 

91. Modulis SIMOS12/16/18 VAG (J2534)
The modules are designed to read-write SIMOS12.1/12.2/16.11/18.1/18.2/18.6/18.10 ECUs installed on VAG vehicles.

Work with SIMOS12.1/12.2 ECU is performed on the table without opening the ECU. Virtual reading and writing of software/calibrations through the diagnostic connector is supported.
Work with SIMOS16.11 ECU is performed on the table with opening the ECU. Virtual reading and writing of software/calibrations through the diagnostic connector is supported.
Work with SIMOS18.1/18.2/18.6/18.10 ECU is performed on the table with ECU opening. Virtual reading and writing of software/calibrations via the diagnostic connector is supported (except SIMOS18.10).

Identification and error reading/resetting functions are also available.

The module requires connection to the ECU using a J2534 Dialink or SM2/SM2Pro adapter. Please refer to the documentation for details.

The module performs automatic recalculation of the CW of the recorded calibrations.
The module allows full reading and writing of the ECU contents except for the OTP area. 

92. Modulis Continental DC4 TCM + Continental TA2005 TCM
Map area and software reading/writing of DC4/TA2005 TCMs installed in Renault vehicles via OBD.

Checksum calculation, identification, VIN code writing (TA2005). 

93. Modulis EMS210x Ford J2534
Software and map area reading/writing of EMS2101 (Test) / 2102 (Test) / 2103 ECUs in Ford Fiesta and Mondeo 4 vehicles 1.25L, 1.4L, 1.6L. 

94. Modulis MSVD8x/90 BMW (J2534)
MSV80.0/MSV80.1/MSD85.0/MSD85.1/MSV90 on BMW vehicles

Reading and Writing in BSL mode;
Error identification, reading, resetting for E-series ECUs.
Checksum corrections for the written calibrations 

95. Modulis SDIx Porsche (J2534)
SDI7/8 on Porsche vehicles

OBD Reading, Writing;
BSL Reading, Writing;

Error identification, reading, resetting
Checksum corrections for the written calibrations 

96. Modulis Bosch MSE6.0
The module allows FLASH reading and writing of software / calibrations of Bosch MSE6.0 ECUs installed on various models of motorcycles. 

97. Modulis Continental EAST80.D1/EAST80.F1 J2534
Reading/writing software/calibration of Continental EAST80.D1 ECUs installed on GreatWall/Haval vehicles.
Reading/writing software/calibration of Continental EAST80.F1 ECUs installed on Hawtai vehicles.

The module performs automatic checksum correction of calibrations during recording.

Part of a module kit with DSI TCM 

98. Modulis Set of modules: Delphi DCM6.2 China + Delphi DCM6.2 SsangYong + Delphi DCM7.1 China (J2534)
Designed for reading/writing calibrations and program of Delphi DCM6.2AP ECU installed on GreatWall/JAC cars via the diagnostic connector.
Designed for reading/writing calibrations and program of Delphi DCM6.2AP ECU installed on SsangYong cars via the diagnostic connector.
Designed to read/write calibrations and program Delphi DCM7.1AP ECU installed on GreatWall/DongFeng cars via the diagnostic connector.

Additional functions:

Calibration area checksum recalculations
ECU identification: allows to request ECU identification data.
Error reading and resetting. 

99. Modulis Delphi DCM6.2 VAG
Reading and writing of software and calibrations from Delphi DCM6.2V ECU for VAG vehicles using the UDS protocol via OBD.

The module performs automatic checksum correction of calibrations during recording. The module supports the "Virtual Reading" function of the ECU. The ECU reading is done on the bench without opening the ECU. 

100. Modulis Delphi MT22.x/MT62.1
Delphi MT22.3/22.5 ECUs via CAN-bus via OBD
Delphi MT62.1 ECU via OBD

Please note: Delphi MT22.5 ECUs have two different hardware modifications (outwardly identical):

programmable via CAN: work with such ECUs is supported by this module
programmable via K-Line: work with such ECUs is not supported by this module, you must use Delphi MT20
 

Additional functions:

Checksum calculation of the calibration area.
ECU identification.
ECU errors reading and clearing 

101. Modulis EMS3180 J2534
Reading and writing calibrations and programming of the EMS3180 ECU installed on Renault vehicles via OBD

Additional functions:

Checksum calculation of the calibration area
ECU ID
To work with the EMS3180 ECU, which includes full access to FLASH / EEPROM, an extension of the module's capabilities is available, purchased as an additional license: Renault Extra 

102. Modulis SDI9/10 Porsche (J2534)
The module is designed to read-write SDI9/10 ECU installed on Porsche cars.

Work with ECU is performed on the bech with opening of the ECU. Identification and error reading/resetting functions are also available.

The module performs automatic recalculation of the CC of the calibrations recorded.
The module allows full reading and writing of the ECU contents. 

103. Modulis AECS UAZ
The module is designed for reading-writing software/calibrations of AECS ECUs installed on UAZ vehicles via the diagnostic connector.
The module performs automatic correction of calibrations when writing.

The J2534 adapter is required for operation. 

104. Modulis Set of modules: M74.8/M74.8+/M74.9
Module Features:

This module works in conjunction with CombiLoader 2.16 or newer;
Work with ECU is performed without disassembling it.

The module is designed to read-write FLASH and EEPROM of M74.8 ECU with ITELMA software based on STMicroelectronics SPC58VQ series processors (Power architecture).
The module is designed to read-write FLASH and EEPROM of M74.8+ ECU with ITELMA software based on STMicroelectronics SPC58VQ series processors (Power architecture).
The module is designed to read-write FLASH and EEPROM of ECU M74.9 with ITELMA software based on Artery processors of AT32F4xx series (ARM architecture).
The J2534 adapter is required for operation. 

SID605/WISE15/MD1/EQ EDC17CV54 J2534
Designed for reading-writing software/calibrations of SID605/WISE13/WISE15 ECUs installed on MAZ and Chinese-made vehicles via the diagnostic connector.

105. Modulis SID605: Writing software/calibrations.
WISE15: Reading, writing software/calibrations.
WISE15C: Reading, writing software/calibrations/configuration.
Bosch MD1CC878/WISE13(SPC58): Reading, writing software/calibrations.
Bosch MD1CE100: Reading, writing calibrations.
Bosch MD1CE868(TC375): Reading, writing calibrations.
EQ EDC17 V6: Reading, writing calibrations.
EQ EDC17 V7: Reading, writing calibrations.

The J2534 adapter is required for operation. 

106. Modulis Bosch MG1 China
The module is designed to read/write software and/or calibrations of the Bosch MG1UA008/MG1US008 ECU installed on Chinese-manufactured vehicles.

The module allows you to:

Read and write the software and/or calibration area (provided that the ECU itself can read the software area)
Calculate and, if necessary, automatically adjust the calibration area checksum
Identify the ECU
Read and reset fault codes
Add protection against reading by the diagnostic method 

107. Modulis BSL mode SPC5/MPC5xxx
Attention! This module works together with CombiLoader 2.15 or newer.

The module is designed to read and write FLASH/EEPROM of ECUs based on ST/Motorola/FreeScale/NXP SPC5/MPC5xxx processors via the built-in BAM (BootAssistModule).
Such ECUs include, for example:

Delphi ACDelco E78
Delphi ACDelco E83
Delphi DCM6.2
Delphi MT62.1
SID605/WISE15/WISE15C
Other types of ECUs with SPC5/MPC5xxx processors.
The module supports the following processors:

MPC5565
MPC5566
MPC5674F
SPC563M54/60/64
SPC564A80
A J2534 adapter, purchased separately, is required for operation. 

108. Modulis EMS31xx/SID321 Renault
The module is designed to read/write calibrations and write the program of the EMS3140/3160/3161/SID321 ECU on Renault/Nissan vehicles.

Additional functions:

Calibration area checksum recalculations
ECU identification
Error reading and resetting
Attention! At the moment, there are no ways to restore the ECU after a failure. Be extremely careful when working with the ECU. Writing inappropriate software or incorrectly modified calibrations may lead to the ECU not working. 

109. Modulis M74.8/M74.8+/M74.9 VAZ [J2534]
This module works together with CombiLoader 2.16 or newer.

The module is designed to read and write FLASH and EEPROM of the ECU M74.9 259.3765 004-11 of GAZ vehicles with ITELMA software based on Artery AT32F4xx series processors (ARM architecture). Work with the ECU is performed without disassembling it.

M74.9 GAZ firmware is saved only in the SMS-Soft Container File format. To edit such firmware, you must use only the CTPro editor.

A J2534 adapter is required for operation, purchased separately.

110. Modulis M74.8/M74.8+/M74.9 VAZ [J2534] Discount
Discount for the users of Set of modules: M74.8/M74.8+/M74.9

This module works together with CombiLoader 2.16 or newer.

The module is designed to read and write FLASH and EEPROM of the ECU M74.9 259.3765 004-11 of GAZ vehicles with ITELMA software based on Artery AT32F4xx series processors (ARM architecture). Work with the ECU is performed without disassembling it.
M74.9 GAZ firmware is saved only in the SMS-Soft Container File format. To edit such firmware, you must use only the CTPro editor.

A J2534 adapter is required for operation, purchased separately. 

111. Modulis M86/M74M (VAZ)
The module is designed for FLASH/EEPROM reading/writing of M86/M74M ECUs with VAZ software based on Infineon XC27x5 processors via BootStrapLoader.

The functionality of this module does not coincide with that of Mikas-12/M75/M74.5/M86I.

Supported software: I745xxxx; I755xxxx; I765xxxx (excluding I745HA03, I765LGxx for CNG)

M86 ECUs are mounted on Lada Vesta, Largus, Xray with 1.6L engines. M74M ECUs are mounted on 1.6L Lada Granta from 2019.